| |
 |
 |
 |
 |
 |

 |

 |
| Bike > Brakes > Road Bike Brakes |
| Road Bike Brakes Products from SRAM |
Products
 |
SRAM Force Brake Calipers From afar, Force looks like Red's twin, much in the way Rival used to look like Force's twin. The big change is that the arms that support the brake cable-housing stop look thinner, more graceful. From the side, the cutouts are bigger. They call it a "skeletonized" design. The differences that separate these Force calipers from Red start with the color. The finish here is a nice grey anodizing, called Zephyr Silver, rather than polished like Red. The brake shoes don't have the cutouts that the Red shoes have, and while you may not be able to see it, Force doesn't have the titanium bolts and such that Red calipers have; instead, they rely on stainless steel parts. Like Red, the Force calipers use cold forged aluminum for the arms.In terms of function, Force is nearly identical to Red. There is a hex-head spring tension adjusting screw on the side to adjust the feel of the squeeze. There is also a hex-head screw atop the calipers for easy centering. The brake shoes come with SwissStop pads manufactured to SRAM's all-weather spec.The SRAM Force Brake Calipers come two to a set. The quick release is indexed for precise opening and closing, and there's a micro-adjusting barrel against the cable housing. The brake pads are replaceable with any Shimano/SRAM-compatible pad. The claimed weight of the SRAM Force brake calipers is 280g per set.
Details
BUY THIS PRODUCT |
$97.95
|
 |
 |
SRAM Red Aero Link Brake Calipers In a sport where the beauty and efficiency of speed is of the essence, it's no simple task to inject any semblance of sex appeal into a device whose entire role is to defuse that speed. The original SRAM Red Brakes were sleek and attractive enough, but there was little to differentiate between Red and Force, besides the marginal weight savings. The goal of SRAM engineers was to create a clearer definition between their gruppos, while still improving on the original Red caliper. The SRAM Red Aero Link Brake Calipers accomplish this by reducing weight and increasing braking power, while still reducing the front brake's aerodynamic profile as much as possible. No small task, but thanks to SRAM's newly introduced AeroLink Arm with its Force Multiplier Link, the SRAM engineers have hit the mark with flying colors. SRAM first obtained a patent for that AeroLink arm; a tiny pivot joint that hides behind the svelte calipers and multiplies braking power and modulation. This unique innovation allowed SRAM to greatly shrink the caliper's frontal area, as you can see in the greatly simplified cable routing where the triangular, skeletal caliper juncture once was. From the spring adjusters, to the cable clamp, to the calipers overall face, no detail was overlooked in its potential to reduce drag. This is also apparent in SRAM's redesign of the two-position barrel adjuster, where a grippy, soft touch coating takes on a shark fin profile as it meets the wind. Longer rides in bad weather tend to take a much quicker toll on brake pads. SRAM accounted for this, making the quick-release lever easier to access, and including a four-position indexed release. This essentially removes the adjustment guesswork when it's time to loosen or tighten your calipers to account for respective pad wear. And yes, even the lever points out of the wind, when fully locked.
Details
BUY THIS PRODUCT |
$351.00
|
 |
 |
SRAM Rival Brake Calipers From component to component the storyline between Force and Rival is the same: Force and Rival products are mechanically and functionally very closely matched. The only meaningful distinction is their weight. Rival provides similar lock-up power and speed modulation as Force; they're built with similiar "skeletonized" caliper arms to reduce weight; they use the same brake pad compound to optimize stopping power in both wet and dry conditions. In short, blindfolded it's impossible to feel an on-the-bike difference between the two.Aside from less extensive machining of the arms, Rival brake calipers lack the stainless steel mounting bolt and pivot hardware that Force uses. This allows the Force calipers to come in just a few grams lighter. And Force has a gray finish, while these second-generation Rival calipers have a black finish.
Details
BUY THIS PRODUCT |
$115.00
|
 |
|
|
|
|
|